I already linked to the story, but Roger LaPointe of Atomic Athletic sent me a hard copy of the newspaper (yes they still do exist).
Besides the write-up there’s a great picture of me in action on the front. This makes it the second time ever I’ve been on the front page of a newspaper. (The first time had to do with hemp foods at the health food store I worked at but that’s another story.)

In strength,
Logan Christopher
Filed under Feats of Strength, Oldtime Strongmen by on May 29th, 2010. 2 Comments.
As was previously mentioned this event was covered in the press. Here’s a link over to the BGNews with the full story.
Also over on the Kettlebell Juggling Blog I uploaded a video of Andrew Durniat and myself going head to head.
I’ve been interview on a couple radio stations too. If you’re interested in hearing those I’ll get the link up when they’re available.
In strength,
Logan Christopher
Filed under Feats of Strength, Oldtime Strongmen by on May 25th, 2010. Comment.
I’m not sure if I can claim the title world’s strongest hair…at least thus far, but there’s no doubt that my hair is strong.
If you’re following me on Facebook or Twitter than you may have read about what happened at the Atomic Athletic Strongman Picnic. Either way, here’s the video.
Here is the full story at least as far as my own performance is concerned.
I got set ready to pull. Well over a hundred people ready, watching and cheering.
I strained and pulled. The fire truck rocked forward but with its massive wheel it was difficult to get it to turn over.
After a couple futile attempts we took a break to make some adjustments. Changing the chains to get a more even pull on each side. Moving the truck to get it out of any dip it may have been in. The tires were filled with air the previous day but without a pressure rating they were skeptical of adding too much!
This time I knew I couldn‘t fail. I had flown across the US just for this. Once I started pulling I didn’t stop ‘til the end. Not only was this the biggest vehicle I’ve done but it was also the longest distance, my guess being at least 50 yards.
I was so concentrated on the strain on my head and neck I didn’t even realize how much my legs were drained. You see when I stand up at the end, also due to being a bit light headed, that I nearly fall over.Hope you enjoyed that. I know I did. And it won’t be the last, nor the biggest vehicle I pull with my hair.
In strength,
Logan Christopher
P.S. Thanks to Andrew Durniat for filming this for me. You’ll see some more video of the event later, including when Andrew and I went head to head in kettlebell juggling. I think I enjoyed that even more than the hair pulling.
Filed under Feats of Strength, Oldtime Strongmen, Videos by on May 18th, 2010. 19 Comments.
As you’re reading this, unless you’re unlike me and don’t check your email several times a day, I’m on a plane to Ohio.
The day of reckoning is upon me.
Tomorrow is the Atomic Athletic Great Black Swamp Olde Time Strongman Picnic. Wow, that name is a mouthful.
Tomorrow I perform.
Tomorrow I pull a fire truck with my hair.
(As a side note I ran into a couple old friends a couple days ago and told them what I was doing this weekend. What else would I be doing on a Saturday afternoon? Watching sports and drinking a beer? No. Going to the beach? Nope. Pulling a fire truck with my hair? Of course. Typical for me. The more I think about it the more absurd it seems even to me.)
I’ve trained hard. I’m as prepared as I can be.
There’s going to be hundreds of people. Radio and TV coverage. Even now I can hear the play-by-play action going on in my head…and yes its in John Madden’s voice.
…He’s getting set for the pull. The chains are taught. He’s straining but nothing’s happening…oh…wait a second…yes there it is! The firetruck is moving! Slowly but Logan’s gaining momentum. He…could…go…All…THE…WAY!!!!
The pressure is on.
Wish me luck.
In strength,
Logan Christopher
P.S. Thanks for everyone who sent me Happy Birthday wishes yesterday. I’ve never received that many in one day and it was quite overwhelming. This is certainly a new way to celebrate!
Filed under Feats of Strength, Oldtime Strongmen by on May 14th, 2010. 11 Comments.
Oh no, here it comes again.
Every single time I train for this, right before the pull, I’m swearing like a sailor. Its because its painful, very painful. And as I get ready I’m thinking about how painful its going to be.
I’m talking about pulling vehicles by my hair. As mentioned in a recent post, Strongman Picnic, I’m set to perform in less than two weeks from know.
I’ll be pulling a fire engine. Its big. Much bigger than what I’ve been pulling. So in training for it I do what you do in any other training. I make it progressive. More weight at first then I had do switch to more of an incline when I was pulling the biggest vehicle I had available.
I’ve also played around with the setup and my technique as its not likely something I’m going to get coached in.
Back to the pain…
This is an area familiar to strongmen. Pain tolerance.
Bend a piece of steel or a horseshoe across your leg? That’s going to hurt. And the first few times you do it, it’ll leave bruising (sometimes massive amounts). You’re might even be strong enough to bend that steel if only your leg could take the drive.
One tip I received in learning to bend nails is once you get to the point where its starts to hurt and you want to quit, that’s where you need to double your efforts and crush it. That’s the point were the nail WILL bend.
You’re not seeking this pain. In some feats of strength its not so painful. But in some it is. Many feats can cause rips in skin, various bruises, just plain pain or much more.
Dennis Rogers once drove a nail through his hand…backwards. Usually the feats works without much effort. In this case it was not so.
It comes with the territory.

This is just the first batch that came out after the pull. I lost more in the shower later.
Whatever the reason this one hurt more. And I lost more hair. I always lose some when doing this stunt. (I like to think that all the weak ones must go.) But this time there was more. Here I could hear the hair rip from my head at one point in the pull.
When I finished a few large chunks came out. Nothing noticeable as far as how I look is concerned and I seem to have plenty left. But certainly not comforting.
Such is the life of a strongman.
In strength,
Logan Christopher
P.S. I wrote an article over at Straight to the Bar. Lift weights? So what? Check it out.
Filed under Feats of Strength, Mental Training, Oldtime Strongmen by on May 3rd, 2010. 10 Comments.
This is a guest post by Jedd Johnson of the Diesel Crew. Jedd competes in Grip Contests, loves Feats of Grip Strength, and has written several Grip training resources, including his Nail Bending eBook and Card Tearing eBook which I highly recommend. If you bend steel you’ll want to pay attention to this article.
Does this sound familiar?
You can’t wait to destroy that new PR bend…
You set it down on your wraps and roll it up in a hustle…
You pull it up into position as quick as you can…
You plunge down onto it to get it started…
BOOM! You smash yourself right in the face.
It happens all the time. In the haste to try to get a bend started, you put your wraps on too loose and just as you get the steel to start kinking, one of the wraps slip and your entire torso recoils as you try to stop your hand that flies off the wrap, only to punch yourself in the jaw or lip.
This self-inflicted pain is a direct result of bending wraps that are put on too loose. When the wraps are loose they slide around and it becomes very hard to predict what will happen as the bend develops.
Unfortunately the hazards of loose wraps don’t just stop at the risk of giving yourself a knuckle sandwich. Poorly wrapped steel can also lead to an injury. When wraps slip and you lose your grip on the bend, you can have a number of things go wrong, including jamming a finger, twisting a wrist, or even pulling something in your chest or shoulder.
Getting a tight wrap is key to high bending performance and risk management, so here’s a few methods you can use to get a good tight wrap.
TIGHT WRAPPING METHODS
The most important thing to understand when getting a tight wrap is that you need tension on both sides of the wrap. You will be putting tension on one side as you wrap the material over the end of the nail. You also need some sort of tension on the opposite end of the wrap. Here’s a few ways to do this.
Foot Method

Place the wrap flat on the floor and put the end of the steel right on the very edge of the wrap. From here, take a position similar to a hip flexor stretch and place your lead foot on the front end of the wrap. This will keep the wrap tight while you wrap the steel.
Weight Method

If you do not have the flexibility to get into that position comfortably for that wrapping technique, then you can try this. Take a weight plate or a block weight and set it on the end of the wrap. From there, start wrapping the nail, making sure to pull tight every time you complete a half turn on the steel.
Partner Method
Optimally, you want to have a partner help you wrap the nail. With a partner, he or she can respond to your wrap and pull at the right angle accordingly. This is the best way to get a really tight wrap, especially if your partner understands how important it is to have the wrap as tight as possible.
OTHER KEY POINTS
Here are just a few other points to make a practice when wrapping your steel for serious bending.
Wrap Shape

If you are doing the wrapping correctly, your wraps should begin to lose their perfect rectangular shape after only a few bends. They should become more of a long trapezoid shape because on edge of the wraps will elongate somewhat. This shows you are pulling the wrap tight on each roll of the steel.
Chalk in the Wraps

You can get the wrap to conform better to the shape of what you are bending better by adding some chalk into the last few inches of the wrap material. This helps fill the gaps of air that accumulate, especially if you are bending a bolt or a nail with a head on it.
Chalk the Hands and Between the Fingers

When squeezing on the ends of the nail, the hand skin has a tendency to become moist from perspiration. This moisture can cause your hands to lose their grip on the nail, regardless of what bending technique you use. For this reason, it is a good idea to chalk you hands well. I suggest putting a bit more chalk on the hands when bending that when gripping plates. I also suggest adding chalking between the fingers to keep that area dry as well.
NOW IT’S UP TO YOU
Once the wraps are on getting the nail bent is up to you. Remember to apply proper hydraulic pressure on the ends of the nail or bolt. Pressing on the ends of the steel will help to reinforce the tight wrap you just put on by helping better concentrate force into the nail effectively.
As you get the bend started, keep in mind that as the steel warps, it heats up. While hotter steel is easier to bend, there is no need to try to rush the bend. Rushing the bend can lead to mistakes, a slipped grip, and more injuries. Plus, if your hand slips off because you are rushing, you will lose time on the bend anyway, so it is better to stay focused and under a controlled pace throughout the duration of the bend.
The techniques covered above should help you to get a good tight wrap so that when you go for your bend you can maximize the force you drive into the nail. Good luck with your bending and if you have any questions on wrapping or bending, leave a comment below.
Thanks and all the best in your training.
Jedd Johnson
Jedd Johnson is a Certified Strength and Conditioning Specialist in Northeastern PA. He specializes in Grip Strength Training but studies all types of strength training disciplines. His website, TheGripAuthority.com is centered around building World Class Grip Strength with the goal of helping all its members accomplish their grip strength goals.
Filed under Feats of Strength, Hand Strength by on Apr 27th, 2010. 1 Comment.






Immediate download plus you'll receive my regular email tips to help you build legendary strength and fitness.









